Project Showcase

The Murphy and Joseph Gallagher Teams used Horizontal Directional Drilling (HDD) and Microtunnelling to overcome several challenges on the project to install the new pipeline

We have been contracted by UKPN and Clancy Dowcra to design and construct two HDD crossings from Willesden Grid main substation to the new substation on Atlas Road.

We were contracted to undertake six HDD crossings at three locations drilling under Network Rail assets for UKPN and Clancy Dowcra. Each location required two separate bores reamed up to 22inch, with each bore housing nine electric ducts.

Joseph Gallagher were contracted by Fastflow to undertake diversion works on a high-pressure gas main for National Grid.

The A13 Road Widening Project is being delivered by Kier on behalf of Thurrock Council. The works include adding an additional lane in both directions between Orsett and Stanford-le-Hope and replacing four bridges.

The client was Welsh Water and as part of the AMP 6 works used Skanska to project manage the scheme with Joseph Gallagher Ltd appointed after a review of the technical issues regarding the works.

This pumping station and associated works was undertaken as a turnkey package for civil and MEICA works.

JTS were initially contacted to provide a quote for “directional Drill” river crossing to install a 450mm PE Rising main.

This project was designed to remove area flooding, by transferring flows to the Clapham trunk sewer located in Clapham High Street, a main arterial route to the city centre.